© 2011 Fujitsu Technology Solutions
Error Message Error: Quiet Period (secs) format is invalid.
Explanation User uses non-numeric characters for Quiet Period.
Recommended Action Use numeric character to configure Quiet Period.
Error Message Error: Value (<value>) is out of range for Quiet Period (secs).
The valid range is 0 to 65535.
Explanation The value of Quiet Period is out of range.
Recommended Action The range of Quiet Period is 0 to 65535.
Error Message Error: Transmit Period (secs) format is invalid.
Explanation User uses non-numeric characters for Transmit Period.
Recommended Action Use numeric character to configure Transmit Period.
Error Message Error: Value (<value>) is out of range for Transmit Period (secs).
The valid range is 1 to 65535.
Explanation The value of Transmit Period is out of range.
Recommended Action The range of Transmit Period is 1 to 65535.
Error Message Error: Supplicant Timeout (secs) format is invalid.
Explanation User uses non-nueric characters for Supplicant Timeout.
Recommended Action Use numeric character to configure Supplicant Timeout.
Error Message Error: Value (<value>) is out of range for Supplicant Timeout
(secs). The valid range is 1 to 65535.
Explanation The value of Supplicant Timeout is out of range.
Recommended Action The range of Supplicant Timeout is 1 to 65535.
To Next Page
Loading...
