Fujitsu PRIMERGY BX900 - Service VLAN

© 2011 Fujitsu Technology Solutions
3.3.5 Service VLAN
This section contains the Service VLAN module messages.
Error Message Incorrect input! Use 'svc-vlan <svcVlanName> <vlanID>
<uplinkSetName>'.
Explanation User input incomplete command.
Recommended Action Use 'svc-vlan <svcVlanName> <vlanID> <uplinkSetName>'.
Error Message Incorrect input! Use 'no svc-vlan <svcVlanName>'.
Explanation User input incomplete command.
Recommended Action Use 'no svc-vlan <svcVlanName>'.
Error Message Incorrect input! Service VLAN name can not more than 32
characters.
Explanation User input over 32 characters for Service VLAN name.
Recommended Action Maximum 32 characters can be used for Service VLAN name.
Error Message Incorrect input! Service VLAN name must contain alphanumeric
characters only.
Explanation User input non-alphanumeric characters for Service VLAN
name.
Recommended Action Use alphanumeric characters only for Service VLAN name.
Error Message Incorrect input! Service VLAN <svcVlanName> has been used!!
Explanation User attempt to create an exist Service VLAN name.
Recommended Action Use other non-exist name for Service VLAN name.
Error Message Incorrect input! Service VLAN <svcVlanName> does not exist!!
Explanation User attempt to delete a non-exist Service VLAN name.
Recommended Action Make sure the Service VLAN name is exist.
Error Message ERROR: Can't set Service VLAN group with the same VLAN ID
<vlanId> on the <svcVlanName>.
Explanation User attempt to set Service VLAN group with the same VLAN ID
of other groups.
Recommended Action Use other VLAN ID for your service VLAN group.