© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'show svc-vlan [<svcLanName>]'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘show svc-vlan [<svcLanName>]'.
Error Message Incorrect input! Use 'svc-lan <svcLanName>'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘svc-lan <svcLanName>'.
Error Message ERROR: Could not set external port <intIfNum> on Service LAN
port.
Explanation User try to add an external port to the Service LAN.
Recommended Action External port doesn’t support Service LAN function. External port
should use Uplink set.
Error Message ERROR: Interface <intIfNum> has been used!!
Explanation User try to add a port to the Service LAN, but this port has been
added in another Service LAN or Service VLAN.
Recommended Action User should move this port out of the original Service LAN or
Service VLAN, and then add this port to this Service LAN.
To Next Page
Loading...
