© 2011 Fujitsu Technology Solutions
2 Message and Recovery Procedures
This chapter describes the PRIMERGY BX900 switch system messages in alphabetical order
by facility. Within each facility, the messages are listed by severity levels 0 to 7: 0 is the highest
severity level and 7 is the lowest severity level. Each message is followed by an explanation
and a recommended action.
The messages listed in this chapter do not include the hostname or the date/time stamp
designation that display only if the software is configured for system log messaging.
The chapter includes these message facilities:
• System Messages
• Event Messages
• VLAN Messages
• Spanning Tree Messages
• Storm Control Messages
• Port-Monitor Messages
• IGMP Snooping Messages
• BOOTP Client Messages
• DHCP Client Messages
• DNS Relay Messages
• DDNS Client Messages
• TACACS+ Messages
• DOT1X Messages
• RADIUS Messages
• COS Messages
• ACL Messages
• DiffServ Messages
• Stacking Messages
• File System messages
• PING & TRACEROUTE Utility Messages
• SNTP Messages
• TFTP/FTP Messages
• User Configuration Messages
• SNMP Messages
• CLI Messages
• Web Messages
• sFlow Messages
To Next Page
Loading...
