© 2011 Fujitsu Technology Solutions
4.2.9 IGMP Snooping
This section contains the IGMP Snooping module messages.
Error Message Error: IGMP Query Interval (secs) format is invalid.
Error: Failed to set IGMP Query Interval (secs). You entered 0.
Explanation The value of IGMP Query Interval (secs) is not numeric
character.
Recommended Action Set IGMP Query Interval (secs) with numeric character 2 to
3600.
Error Message Error: Value (<value>) is out of range for IGMP Query Interval
(secs). The valid range is 2 to 3600.
Error: Failed to set IGMP Query Interval (secs). You entered
(<value>).
Explanation The value of IGMP Query Interval (secs) is out of range.
Recommended Action Set IGMP Query Interval (secs) with numeric character 2 to
3600.
Error Message Error: IGMP Report Delay (secs) format is invalid.
Explanation The value of IGMP Report Delay (secs) is not numeric character.
Recommended Action Set IGMP Query Interval (secs) with numeric character 2 to
3600.
Error Message Error: Value (<value>) is out of range for IGMP Report Delay
(secs). The valid range is 1 to Group Membership Interval -1.
Explanation The value of IGMP Report Delay (secs) is out of range.
Recommended Action Set IGMP Report Delay (secs) with numeric character 1 to
Group Membership Interval -1.
Error Message Error: IGMP Query Timeout (secs) format is invalid.
Explanation The value of IGMP Query Timeout (secs) is not numeric
character.
Recommended Action Set IGMP Query Timeout (secs) with numeric character 0 to
3600.
Error Message Error: Value (<value>) is out of range for IGMP Query Timeout
(secs). The valid range is 0 to 3600.
Explanation The value of IGMP Report Delay (secs) is out of range.
Recommended Action Set IGMP Query Timeout (secs) with numeric character 0 to
3600.
To Next Page
Loading...
