Fujitsu PRIMERGY BX900 - Port Security

© 2011 Fujitsu Technology Solutions
3.4.2 Port Security
This section contains Port Security module messages.
Error Message Incorrect input! Use 'port-security violation shutdown'.
Explanation User input incomplete command.
Recommended Action Use 'port-security violation shutdown'.
Error Message Incorrect input! Use 'port-security max-dynamic <0-600>'
Explanation User input incomplete command.
Recommended Action Use 'port-security max-dynamic <0-600>'
Error Message Incorrect input! Use 'port-security max-static <0-20>'
Explanation User input incomplete command.
Recommended Action Use 'port-security max-static <0-20>'
Error Message Incorrect input! Use 'port-security mac-address <mac-addr>
<1-4094>'
Explanation User input incomplete command.
Recommended Action Use 'port-security mac-address <mac-addr> <1-4094>'
Error Message Incorrect input! Use 'no port-security mac-address <mac-addr>
<1-4094>'
Explanation User input incomplete command.
Recommended Action Use 'no port-security mac-address <mac-addr> <1-4094>'
Error Message Incorrect input!! Use 'clear port-security dynamic {address
<mac-addr> | interface <unit/slot/port>}'.
Explanation User input incomplete command .
Recommended Action Use 'clear port-security dynamic {address <mac-addr> |
interface <unit/slot/port>}'.
Error Message Can not support this command on INTERFACE RANGE MODE
!!!
Explanation User attempt to configure Port-Security Static MAC address
under interface range mode.
Recommended Action Configure Port-Security Static MAC address port by port.