Fujitsu PRIMERGY BX900 - VLAN Messages

© 2011 Fujitsu Technology Solutions
2.21 VLAN Messages
This section contains the VLAN module messages.
Severity Level 6
Error Message dynamicToStaticVlanConvert: Failure to convert %d.
Explanation Fail to convert the dynamic VLAN to static VLAN.
Recommended Action The dynamic VLAN need to check the availability.
Severity Level 6
Error Message No available entries for vlan ID %d.
Explanation There is no VLAN available. It reaches the max. VLAN entries in
system.
Recommended Action The dynamic VLAN need to check the availability.
Severity Level 6
Error Message No available entries for vlan ID %d.
Explanation There is no VLAN available. It reaches the max. VLAN entries in
system.
Recommended Action The VLAN table is exceeded to the system limitation.
Severity Level 6
Error Message Attempt to create a vlan with an invalid vlan id %d
Explanation The range of the VLAN id is invalid.
Recommended Action To create a VLAN ID in the support range.
Severity Level 6
Error Message Unable to obtain permission from the Resource Manager to
create VLAN vlan id %d
Explanation Unable to obtain permission from external resource manager to
create resource.
Recommended Action The VLAN module is failed to init.
Severity Level 6
Error Message Creation of vlan %d failed
Explanation Fail to create a specific VLAN.
Recommended Action Need to check the VLAN ID is available or not.