© 2011 Fujitsu Technology Solutions
4.2.5 IP Subnet-based VLAN
This section contains the IP Subnet-based VLAN module messages.
Error Message Error: IP Address requires an IP address in x.x.x.x form with
each octet(x) in the range 0-255.
Explanation The IP address of IP Subnet-based VLAN is not in form x.x.x.x
with numeric character 0-255.
Recommended Action Set IP address of IP Subnet-based VLAN in form x.x.x.x with
numeric character 0-255.
Error Message Error: Subnet Mask requires a subnet mask in x.x.x.x form.
Explanation The IP Subnet Mask of IP Subnet-based VLAN is not in form
x.x.x.x with numeric character 0-255.
Recommended Action Set IP Subnet Mask of IP Subnet-based VLAN in form x.x.x.x
with numeric character 0-255.
Error Message Error: Subnet mask must have contiguous ones and be no
longer than 30 bits.
Explanation The IP Subnet Mask of IP Subnet-based VLAN is not contiguous
ones and over 30 bits in each octet form x.x.x.x.
Recommended Action Set IP Subnet Mask of IP Subnet-based VLAN with contiguous
ones numeric character 0-255 and under 30 bits in each octet
form x.x.x.x.
Error Message Error: The IP address and subnet mask combination is not valid.
Explanation The IP address and Subnet Mask of IP Subnet-based VLAN is
not correct combination.
Recommended Action Set IP address without reserved IP and Subnet Mask with
contiguous ones and under 30 bits in each octet form x.x.x.x.
Error Message Error: VLAN format is invalid.
Explanation The value of IP Subnet-based VLAN ID is not numeric character.
Recommended Action Set IP Subnet-based VLAN ID with numeric character 1 to 4094.
Error Message Error: Value (<value>) is out of range for VLAN. The valid range
is 1 to 4094.
Explanation The value of IP Subnet-based VLAN ID is out of range.
Recommended Action Set IP Subnet-based VLAN ID with numeric character 1 to 4094.
To Next Page
Loading...
