Fujitsu PRIMERGY BX900 - VLAN Port-Group

© 2011 Fujitsu Technology Solutions
3.3.3 VLAN Port-Group
This section contains the VLAN Port-Group module messages.
Error Message Incorrect input! VLAN port group name can not more than 32
characters.
Explanation User input incorrect command.
Recommended Action VLAN port group name can not more than 32 characters.
Error Message Incorrect input! VLAN port group name must contain
alphanumeric characters only.
Explanation User input non alphanumeric characters for VLAN port group
name.
Recommended Action Use alphanumeric characters for the VLAN port group name.
Error Message Incorrect input! VLAN port group <vlanGroupName> does not
exist!
Explanation User input a VLAN port group name, but the VLAN port group
doesn’t exist
Recommended Action Use the correct VLAN port group name for this function.
Error Message Incorrect input! Use 'vlan-group <vlanGroupName> <vlanID>
<uplinkSetName>'.
Explanation User input incorrect command.
Recommended Action Use 'vlan-group <vlanGroupName> <vlanID>
<uplinkSetName>'.
Error Message Incorrect input! Use 'no vlan-group <vlanGroupName>'.
Explanation User input incorrect command.
Recommended Action Use 'no vlan-group <vlanGroupName>'.
Error Message Incorrect input! VLAN port group name can not more than 32
characters.
Explanation User input a VLAN port group name, the length of name
exceeded 32 characters.
Recommended Action VLAN port group name can not more than 32 characters.
Error Message Incorrect input! VLAN port group <vlanGroupName> has been
used!
Explanation User try to create a new VLAN port group that has already exist
in the system.
Recommended Action Use the correct VLAN port group name for this function.