Fujitsu PRIMERGY BX900 - Pin Group

© 2011 Fujitsu Technology Solutions
2.39 Pin Group
Severity Level 4
Error Message "Applying EHM rules for downlink port <interfaceName> is failed
(<code>) w/ pinned interface <interfaceName>",
Explanation Applying EHM rules of downlink port (such as unknown unicast
forward to pinned interface) is not able to be set to the hardware.
Recommended Action Provide output of the ‘show tech-support’ to your support to get
assisant.
Severity Level 6
Error Message "Fail to initialize the egress mask for interface <interfaceName>"
Explanation The egress mask of uplink port is not able to be set to the
hardware.
Recommended Action Provide output of the ‘show tech-support’ to your support to get
assisant.