Fujitsu PRIMERGY BX900 - Qos; Diffserv

© 2011 Fujitsu Technology Solutions
3.5 QoS
3.5.1 DiffServ
This section contains DiffServ module messages.
Error Message Could not delete the Diffserv class.
Explanation User try to delete a DiffSev Class-map, but the class is still being
used in a Policy-map configuration.
Recommended Action User should delete the DiffServ policy that has the Class-map
setting, and then delete the Class-map configuration.
Error Message Could not delete the DiffServ policy.
Explanation User try to delete a DiffServ Policy-map, but the policy is still
being applied on interface(s).
Recommended Action User should remove the policy from the interface(s), and then
delete the Policy-map configuration.
Error Message No more Policies can be created.
Explanation User attempt to create a policy-map when table is full.
Recommended Action Maximum 64 policy-map name can be created.
Error Message This Diffserv class already exists.
Explanation User input an exist class name.
Recommended Action Use other name for class name.
Error Message A Diffserv class with new name already exists.
Explanation User try to modify the name of Class-map, but the new name
has existed in the system.
Recommended Action Use a name that doesn’t use in the system.
Error Message Class Name does not exist.
Explanation User try to use a DiffServ class, but the class name doesn’t exist.
Recommended Action Use the correct DiffServ class name for this function.
Error Message This Diffserv policy does not exist.
Explanation User try to use a DiffServ policy, but the policy name doesn’t
exist.
Recommended Action Use the correct DiffServ policy name for this function.