Fujitsu PRIMERGY BX900 - Page 232

© 2011 Fujitsu Technology Solutions
Error Message ERROR: Uplink Set <uplinkSetName> has been used by other
module.
Explanation User input an Uplink set name to associate with a Port Group,
but the Uplink set has used for other groups.
Recommended Action Use another Uplink set for this Port Group.
Error Message ERROR: Port Group name <portGroupName> is not allowed to
delete.
Explanation User try to delete a Port Group that is created by system.
Recommended Action The system created Port Group could not be deleted, please use
the correct Port Group name for this function.
Error Message Incorrect input! Use 'show port-group [<portGroupName>]'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘show port-group [<portGroupName>]'.
Error Message Incorrect input! Use 'port-group <portGroupName>'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘port-group <portGroupName>'.
Error Message ERROR: Could not set external port <intIfNum> on port group.
Explanation User try to add an external port to the Port Group.
Recommended Action External port doesn’t support Port Group function. External port
should use Uplink set.
Error Message ERROR: This function is not allowed on port-channel members.
Explanation User try to add a port-channel member port to a Port Group.
Recommended Action The interface should move out from the port-channel and then
add to the Port Group.
Error Message ERROR: Interface <intIfNum> is already member of a port
group.
Explanation User try to add a port to the Port Group, but the port has joined
this Port Group already.
Recommended Action Use the correct Port Group for this function.