© 2011 Fujitsu Technology Solutions
Error Message Error: Failed to create Uplink Set. Uplink Set table is full.
Explanation Maximum 30 Uplink Sets have been configured in the system.
Recommended Action Reduce/Remove the unused Uplink Set.
Error Message Error: Failed to delete Uplink Set <uplinkSetName>. It is used by
groups.
Explanation The Uplink Set is used by other group. For example, it is used by
Port Group, VLAN port group, Service LAN or Service VLAN.
Recommended Action Remove the Uplink Set from the groups which are using it.
To Next Page
Loading...
