Fujitsu PRIMERGY BX900 - Page 76

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message FILE LINE: dhcpRelayCnfgrParse(): Invalid command/request
pair
Explanation Invalid command in configuration parse.
Recommended Action The DHCP Relay is fail to init
Severity Level 6
Error Message dhcpRelay_Task: Received invalid message ID in DHCP Relay
message
Explanation Receive worng message.
Recommended Action The system is fail to communicate with the DHCP server.
Severity Level 6
Error Message REQUEST hops field more than config value
Explanation Wrong hop value.
Recommended Action The System is wrong to communicate with the DHCP.
Severity Level 6
Error Message Request's seconds field less than the config value
Explanation Wrong min. waitting time value.
Recommended Action The System is wrong to communicate with the DHCP.
Severity Level 6
Error Message processDhcpPacket: osapiSocketCreate failed creating server
socket
Explanation Socket create fail.
Recommended Action Communication error
Severity Level 6
Error Message processDhcpPacket: Failed binding address to socket
Explanation Socket bind fail.
Recommended Action Communication error
Severity Level 6
Error Message Request could not be relayed to Server
Explanation Packet send fail.
Recommended Action Check the remote DHCP server available not