Fujitsu PRIMERGY BX900 - Page 82

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Failed to set igmp snooping mode (Enable/Disbale) for interface
number
Explanation Setting the specific interface's admin mode fail.
Recommended Action The interface number is failed to set.
Severity Level 6
Error Message Failed to set igmp mrouter mode (Enable/Disable) for interface
number
Explanation Setting the specific interface's igmp mrouter mode fail.
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message Failed to set igmp snooping mode (Enable/Disbale) for vlan
Explanation Setting the specific vlan's igmp snpooping mode fail.
Recommended Action The IGMP snooping is not set the vlan group successfully.
Severity Level 6
Error Message Failed to set igmp mrouter mode(Enable/Disbale) for interface
number on Vlan
Explanation Setting the specific vlan and interface number mrouter mode fail.
Recommended Action The specific vlan interface number is need to checked again.
Severity Level 6
Error Message snoopSave: Error on call to sysapiCfgFileWrite file
snoopCfgData.cfg
Explanation Can not save configuration value into config-file.
Recommended Action The igmp snooping config file is corrupt instead of the factory
Factory.
Severity Level 6
Error Message snoopInit: msgQueue creation error.
Explanation Creating Message Queue fail.
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message snoopCnfgrInitPhase1Process: Error allocating small buffers
Explanation Memory Allocation fail.
Recommended Action The IGMP Snooping module is failed to init.