Fujitsu PRIMERGY BX900 - Page 326

© 2011 Fujitsu Technology Solutions
This section contains the Server Config messages.
Error Message Error: Address is a mandatory field.
Explanation The value of IPv4 address is a mandatory field.
Recommended Action IP address has to be entered.
Error Message Incorrect input! Address must be a valid IP address.
Explanation The value of IPv4 address is a invalid IP address
Recommended Action Use a valid IP address to create a SNTP server.
Error Message Error: Failed to create New SNTP Server. Maximum allowable of
SNTP Servers already configured.
Explanation User does not allowed to create more than 3 SNTP server in a
system.
Recommended Action The maximum provided SNTP server in the system is 3. Please
remove a unused server and then add the new one to the
system.
Error Message Error: Value (<value>) is out of range for Server Port. The valid
range is 1 to 65535.
Explanation The value of Port is a non-numeric value or out of range 1 to
65535.
Recommended Action Use numeric value for server port and make sure the value is in
the range of 1 to 65535.
Error Message Error: Value (<value>) is out of range for Server Precedence.
The valid range is 1 to 3.
Explanation The value of Priority is a non-numeric value or out of range 1 to
3.
Recommended Action Use numeric value for server precedence and make sure the
value is in the range of 1 to 3.
Error Message Error: Value (<value>) is out of range for Version running on
Server. The valid range is 1 to 4.
Explanation The value of Version is a non-numeric value or out of range 1 to
4.
Recommended Action Use numeric value for SNTP version and make sure the value is
in the range of 1 to 4.
Error Message Error: IPv6 Address format is invalid.
Explanation The value of IPv6 address is a invalid IP address
Recommended Action Use a valid IP address to create a SNTP server.