© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message dot1sInit: task creation error.
Explanation Failure creating initiate task
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to initialize dot1s_task
Explanation Failure creating dot1s main task
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to register for NIM Interface change callback!
Explanation Failure registering callback function to NIM module
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to register for VLAN change callback!
Explanation Failure registering callback function to VLAN module
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to register for dot1s state callback with DTL!
Explanation Failure registering callback function to DTL module
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to register for dot1s state callback with Sysnet!
Explanation Failure registering callback function to Sysnet module
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to delete MSTP Instance in the hardware
Explanation Failure deleting MSTP instance
Recommended Action The config file need to be checked by the system setting
environment.
Severity Level 6
Error Message Dot1s Msg Queue is full!!!!Event: %u, on interface: %u,for
instance: %u
Explanation The message queue is full
Recommended Action The Span Tree module is failed to init.
To Next Page
Loading...
