Fujitsu PRIMERGY BX900 - Page 123

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message sFlowRcvrOnwerSet: Failed to give msgQueue semaphore
Explanation Failed to give msgQueue semaphore
Recommended Action Semaphore lock
Severity Level 6
Error Message sFlowFsPacketSamplingRateSet: Failed to give msgQueue
semaphore
Explanation Failed to give msgQueue semaphore
Recommended Action Semaphore lock
Severity Level 6
Error Message sFlowCpIntervalSet: Failed to give msgQueue semaphore
Explanation Failed to give msgQueue semaphore
Recommended Action Semaphore lock
Severity Level 6
Error Message sflowSave: Error on call to sysapiCfgFileWrite file
Explanation Can’t save config file
Recommended Action Check File system
Severity Level 6
Error Message sFlowApplyConfigData: Failed to apply global config
Explanation Failed to apply global config
Recommended Action Config file content wrong
Severity Level 1
Error Message Failure sending sFlow configurator init message.
Explanation Send Message error
Recommended Action System init error
Severity Level 6
Error Message sFlowCnfgrInitPhase1Process: Error allocating data for poller
AVL Tree
Explanation Error allocating data for poller AVL Tree
Recommended Action System init error
Severity Level 6
Error Message sFlowCnfgrInitPhase1Process: Error allocating data for sampler
AVL Tree
Explanation Error allocating data for poller AVL Tree
Recommended Action System init error
Severity Level 6
Error Message Error allocating buffers
Explanation Error allocating Buffer pool
Recommended Action Memory not enought
Severity Level 6
Error Message sFlowCnfgrInitPhase1Process: Falied to allocate memory for