Fujitsu PRIMERGY BX900 - Page 168

© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'no snmptrap <name> <ipaddr>'.
Explanation User input incomplete command.
Recommended Action Use 'no snmptrap <name> <ipaddr>'.
Error Message Incorrect input! Use 'snmptrap <name> <ipaddr> [snmpversion]
[<snmpversion>]'
Explanation User input incomplete command.
Recommended Action Use 'snmptrap <name> <ipaddr> [snmpversion]
[<snmpversion>]'
Error Message Incorrect input! Use 'snmptrap mode <name> <ipaddr>'.
Explanation User input incomplete command.
Recommended Action Use 'snmptrap mode <name> <ipaddr>'.
Error Message Incorrect input! Use 'no snmptrap mode <name> <ipaddr>'.
Explanation User input incomplete command.
Recommended Action Use 'no snmptrap mode <name> <ipaddr>'.
Error Message Incorrect input! Use 'snmptrap ipaddr <name> <ipaddrold>
<ipaddrnew>'.
Explanation User input incomplete command.
Recommended Action Use 'snmptrap ipaddr <name> <ipaddrold> <ipaddrnew>'.
Error Message Snmptrap already exists!
Explanation User attempt to add an exist Snmptrap name.
Recommended Action Use other name for the Snmptrap.
Error Message Snmptrap does not exist.
Explanation User attempt to delete a non-exist Snmptrap name.
Recommended Action Make sure the Snmptrap name is existed.
Error Message Incorrect input! Use 'snmp-server sysname <name>'. Name can
be up to 31 characters in length.
Explanation User input incomplete command.
Recommended Action Use 'snmp-server sysname <name>'. Name can be up to 31
characters in length.