Fujitsu PRIMERGY BX900 - Page 218

© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'no spanning-tree mst <mstid> {cost |
port-priority | external-cost}'.
Explanation User input incomplete command .
Recommended Action Use 'no spanning-tree mst <mstid> {cost | port-priority |
external-cost}'.
Error Message Incorrect input! Use ? to list command'.
Explanation User input incomplete command .
Recommended Action Use ? to list command and complete the command.
Error Message This command only works on dot1d mode.
Explanation Spanning-tree edgeport bpdufilter only can be enabled on STP
mode.
Recommended Action Change spanning-tree mode to STP <802.1d> first.
Error Message This command only works on dot1d mode.
Explanation Spanning-tree edgeport bpduguard only can be enabled on STP
mode.
Recommended Action Change spanning-tree mode to STP <802.1d> first.
Error Message This command only works on dot1d mode.
Explanation Spanning-tree loopguard only can be enabled on STP mode.
Recommended Action Change spanning-tree mode to STP <802.1d> first.
Error Message This command only works on dot1d mode.
Explanation Spanning-tree uplinkfast only can be enabled on STP mode.
Recommended Action Change spanning-tree mode to STP <802.1d> first.
Error Message Incorrect input! Use 'no spanning-tree guard { loop|none|root }'.
Explanation User input incomplete command .
Recommended Action Use 'no spanning-tree guard { loop|none|root }'.
Error Message Incorrect input! Use 'show spanning-tree interface
<unit/slot/port>'.
Explanation User input incomplete command .
Recommended Action Use 'show spanning-tree interface <unit/slot/port>'.