© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'spanning-tree configuration revision
<0-65535>'.
Explanation User input incomplete command .
Recommended Action Use 'spanning-tree configuration revision <0-65535>'.
Error Message Error: Could not set the bridge maxage.
The bridge maxage value must be less than or equal to 2 *
(bridge forwarddelay - 1)
and greater than or equal to 2 * (bridge hellotime + 1).
Explanation User input invalid value for setting bridge maxage.
Recommended Action The bridge hellotime value must be less than or equal to (bridge
maxage / 2) - 1.
Error Message Error: Could not set the bridge hellotime.
The bridge hellotime value must be less than or equal to (bridge
maxage / 2) - 1.
Explanation User input invalid value for setting bridge hellotime. .
Recommended Action The bridge hellotime value must be less than or equal to (bridge
maxage / 2) - 1.
Error Message Error: Could not force BPDU migration check on this port.
Forceversion for the switch must be 802.1s or 802.1w.
Explanation User attempt to enable protocol-migration on 802.1d mode.
Recommended Action Change the spanning mode to 802.1s (MSTP) or 802.1w
(RSTP).
To Next Page
Loading...
