Fujitsu PRIMERGY BX900 - Page 230

© 2011 Fujitsu Technology Solutions
Recommended Action The maximum Uplink Set is 30, please check the Uplink Set
setting.
Error Message ERROR: Uplink Set name <uplinkSetName> is not allowed to
delete.
Explanation User try to delete a Uplink Set that has associated with a Port
Group.
Recommended Action User should break association with the Port Group first, and then
delete the Uplink Set.
Error Message Incorrect input! Use 'show uplink-set [<uplinkSetName>]'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘show uplink-set [<uplinkSetName>]'.
Error Message ERROR: Could not set internal port <intIfNum> on Uplink Set
port.
Explanation User try to add an internal port to the Uplink Set.
Recommended Action Internal port doesn’t support Uplink Set function. Internal port
should be configured as the member of Port Group, VLAN port
group, service LAN or service VLAN.
Error Message Error: Operation not possible - Port speed does not match LAG
speed or does not full-duplex.
Explanation User try to add an external port to the Uplink Set, but the speed
capability of the external port doesn’t match the setting of this
Uplink Set member ports.
Recommended Action User should check the speed capability of the external port to
match the Uplink Set members.
Error Message Add interface <intIfNum> to Uplink Set <uplinkSetName> failure!
Explanation User try to add an external port to the Uplink Set, but the
member port of the Uplink Set has reached the maximum (8
ports).
Recommended Action User should move one member out of the Uplink Set, and then
add this external port to the Uplink Set.