© 2011 Fujitsu Technology Solutions
Error Message Set Lock identifier ‘<identifier>’ EXCLUSIVE failure!! Normal lock
had already configured.
Explanation User attempt to set EXCLUSIVE lock identifier, but switch has
already configured with this lock identifier.
Recommended Action Use command ‘lock_reset’ to clear lock setting, and then use
command ‘lock <lock_identifier> EXCLUSIVE’ to create lock
identifier.
Error Message Incorrect input! Use 'lock_message {<message_string>
|default}'.
Explanation User does not input lock_message string.
Recommended Action Use 'lock_message {<message_string> |default}.
Error Message Incorrect input! message string can not more than 512
characters.
Explanation User input message string can not more than 512 characters.
Recommended Action The message string can not more than 512 characters.
To Next Page
Loading...
