© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'no capabilities {10|100|1000
half-duplex|full-duplex}'.
Explanation User input incomplete command.
Recommended Action Use 'no capabilities {10|100|1000 half-duplex|full-duplex}'.
Error Message Incorrect input! Use 'capabilities all {10|100|1000
half-duplex|full-duplex}'.
Explanation User input incomplete command.
Recommended Action Use 'capabilities all {10|100|1000 half-duplex|full-duplex}'.
Error Message Incorrect input! Use 'no capabilities all {10|100|1000
half-duplex|full-duplex}'.
Explanation User input incomplete command.
Recommended Action Use 'no capabilities all {10|100|1000 half-duplex|full-duplex}'.
Error Message Incorrect input! Use 'speed-duplex {10|100
half-duplex|full-duplex}'.
Explanation User input incomplete command.
Recommended Action Use 'speed-duplex {10|100 half-duplex|full-duplex}'.
Error Message Incorrect input! Use 'speed-duplex all {{100|10}
{half-duplex|full-duplex}'.
Explanation User input incomplete command.
Recommended Action Use 'speed-duplex all {{100|10} {half-duplex|full-duplex}'.
Error Message This function is not available to this port!!!
Explanation Only external ports can be changed speed. Internal ports always
fix on 1G speed.
Recommended Action User can’t change the speed for the internal ports.
Error Message Incorrect input! This interface is a member of channel group.
Explanation User attempt to enable flowcontrol on a member port of channel
group.
Recommended Action User is not allowed to enable flow control on port-channel
member port. Please enable the flow control on the port-channel
interface.
Error Message Incorrect input! Use 'show interface status {<unit/slot/port> | all}'.
Explanation User input incomplete command .
Recommended Action Use 'show interface status {<unit/slot/port> | all}'.
To Next Page
Loading...
