© 2011 Fujitsu Technology Solutions
Error Message Invalid DSCP value.
Explanation User attempt to create a rule with invalid DSCP value..
Recommended Action Use a DSCP value or a DSCP keyword (af11, af12,af13, af21,
af22, af23, af31, af32, af33, af41, af42,af43, be, cs0, cs1, cs2,
cs3, cs4, cs5, cs6, cs7, ef).
Error Message Incorrect value! DSCP value must be in the range from 0 to 63.
Explanation User attempt to create a rule with invalid DSCP value..
Recommended Action DSCP value must be in the range from 0 to 63.
Error Message Incorrect input! The maximum of 100 ACLs is already
configured.
Explanation User attempt to add a access-list when table is full.
Recommended Action The maximum of 100 ACLs can be configured.
Error Message Incorrect input! The Rule ID <ruleId> is already configured.
Explanation User attempt to add a rule with exist rule ID.
Recommended Action Create a rule with non-exist rule ID.
Error Message ACL rules are full.
Explanation User attempt to add a rule when table is full.
Recommended Action Maximum 10 rules can be created.
Error Message Invalid Wildcard mask. Enter four numbers separated by period
in the range of 0 to 255.
Explanation User input invalid wildcard mask.
Recommended Action Correct the format of wildcard mask, enter four numbers
separated by period in the range of 0 to 255.
Error Message Incorrect input! <macaddr> must be of type <aa:bb:cc:dd:ee:ff>.
Explanation User input invalid MAC address.
Recommended Action Correct the format of MAC address, <macaddr> must be of type
<aa:bb:cc:dd:ee:ff>.
Error Message Incorrect input! <macmask> must be of type <aa:bb:cc:dd:ee:ff>.
Explanation User input invalid MAC mask.
Recommended Action Correct the format of MAC mask, <macmask> must be of type
<aa:bb:cc:dd:ee:ff>.
To Next Page
Loading...
