Fujitsu PRIMERGY BX900 - Page 371

© 2011 Fujitsu Technology Solutions
Error Message Error: Value (<value>) is out of range for Port Path Cost. The
valid range is 0 to 200000000.
Explanation The value of Spanning-Tree CST Port Path Cost is out of range.
Recommended Action Set Spanning-Tree CST Port Path Cost with numeric character 0
to 200000000.
Error Message Error: Failed to set Port Priority.
Explanation The interface is not valid to set Port Priority.
Recommended Action Refresh the WEB page, and select the interface again.
Error Message Error: Failed to set Admin Edge Port.
Explanation The interface is not valid to set Admin Edge Port.
Recommended Action Refresh the WEB page, and select the interface again.
Error Message Failed to Set External Path Cost.
Explanation The interface is not valid to set External Path Cost. The interface
might be deleted from other UI.
Recommended Action Refresh the WEB page, and select the interface again.
Error Message Error: Failed to set BPDU Migration Check. Could not force
BPDU migration check.
Explanation User try to force the port to send out 802.1w or 802.1d BPDUs,
but the Spanning-tree protocol still using 802.1d(STP).
Recommended Action User should change the Spanning-tree mode to 802.1w(RSTP)
or 802.1s(MSTP), and then click 'Force' button of the interface in
CST Port tab.
Error Message Error: Port Priority format is invalid.
Explanation The value of Spanning-Tree MST Port Priority is not numeric
characters.
Recommended Action Set Spanning-Tree MST Port Priority with numeric character 0 to
240.
Error Message Error: Value (<value>) is out of range for Port Priority. The valid
range is 0 to 240.
Explanation The value of Spanning-Tree MST Port Priority is out of range.
Recommended Action Set Spanning-Tree MST Port Priority with numeric character 0 to
240.