Fujitsu PRIMERGY BX900 - Page 389

© 2011 Fujitsu Technology Solutions
Error Message Error: Failed to create Port Channel Members : Speed is not
matched.
Explanation The interface can not be added to a port-channel if Speed is not
matched.
Recommended Action Set the interface to match the current operated speed of the
port-channel before adding to the port-channel.
Error Message Error: Failed to create Port Channel Members.
Explanation The interface used by other module can not be added to a
port-channel.
Recommended Action Remove the interface from other module before adding to the
port-channel.
Error Message Error: Failed to add all members to Port Channel. Member limit
exceeded.
Explanation The Port Channel members reach maximum members. The
maximum number of the port-channel member is 8.
Recommended Action Remove unnecessary members from port-channel first.
Error Message Error: Failed to create Port Channel Members : Type is not
matched.
Explanation The type of the interface is different from the configured
members of a port-channel. For example, a port-channel has a
10G type interface member, you can’t add the 1G type interface
to it.
Recommended Action To add the same type interface to a port-channel.
Error Message Error: Failed to delete Port Channel.
Explanation The Port Channel interface is invalid.
Recommended Action Refresh the WEB page, and select the interface again.
Error Message Error: Failed to set Port Channel. Interface <interface_identifier>
is configured as memeber of a Port Group.
Explanation The interface configured as Port Group memeber can not set to
be port-channel memeber.
Recommended Action Remove the interface from Port Group before adding it to the
port-channel.