© 2011 Fujitsu Technology Solutions
Error Message Error: Timeout Duration (secs) format is invalid.
Explanation User try to configure the Timeout Duration with a
non-alphanumeric characters.
Recommended Action Use alphanumeric character for Timeout Duration.
Error Message Error: Value (<value>) is out of range for Timeout Duration
(secs). The valid range is 1 to 30.
Explanation The Timeout Duration is out of range.
Recommended Action Use the range from 1 to 30 for Timeout Duration.
Error Message Error: Dead Time format is invalid.
Explanation User try to configure the Dead Time with a non-alphanumeric
characters.
Recommended Action Use alphanumeric character for Dead Time.
Error Message Error: Value (<value>) is out of range for Dead Time. The valid
range is 1 to 255.
Explanation The Dead Time is out of range.
Recommended Action Use the range from 1 to 30 for Dead Time.
Error Message Error: IP Address requires an IP address in x.x.x.x form with
each octet(x) in the range 0-255.
Explanation User input an IP address with non-numeric character for
RADIUS Attribute 4 setting.
Recommended Action Use numeric character 0-255 in x.x.x.x form for RADIUS
Attribute 4( NAS-IP Address).
Error Message Error: IP Address format is invalid.
Explanation User input an reserved IP address for RADIUS Attribute 4
( NAS-IP Address). For example, 0.0.0.0 / 255.255.255.255 /
224.xxx.xxx.xxx / 127.0.0.1.
Recommended Action Use the correct IP Address for RADIUS Attribute 4( NAS-IP
Address).
Error Message Error: Could not add radius server
Explanation The IP address of the RADIUS server is already configured.
Recommended Action Use another IP address for RADIUS server.
To Next Page
Loading...
