Fujitsu PRIMERGY BX900 - Page 47

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message <routine_name>: Failed applying COS queue config data to
interface <intIfNum>
Explanation Failed applying COS queue config data to interface
Recommended Action COS queue config to set to fail
Severity Level 6
Error Message <routine_name>: Intf <intIfNum> COS map table config is no
longer valid, using global defaults instead.
Explanation COS map table config is no longer valid
Recommended Action COS map table config is set to invalid
Severity Level 6
Error Message <routine_name>: Failed to apply default COS map table config
to interface <intIfNum>
Explanation Failed to apply default COS map table config to interface
Recommended Action The interface config is set invalid.
Severity Level 6
Error Message <routine_name>: Failed to apply default COS queue config to
interface <intIfNum>
Explanation Failed to apply default COS map table config to interface
Recommended Action The interface config is set invalid.
Severity Level 6
Error Message Error writing config file
Explanation Error writing config file
Recommended Action The config File is corrupt.
Severity Level 6
Error Message <routine_name>: Failed to restore COS factory defaults
Explanation Failed to restore COS factory defaults
Recommended Action The config is set invalid.
Severity Level 6
Error Message cosIntfIsConfigurable: Error accessing COS config data for
interface <intIfNum>
Explanation Error accessing COS config data for interface
Recommended Action The COS config is invalid.