Fujitsu PRIMERGY BX900 - Page 49

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Unable to set global <cosMapIntfModeStr> trust mode on intf
<intIfNum>
Explanation Unable to set global trust mode on interface
Recommended Action The interface is not suitable for the global trust mode setting
Severity Level 6
Error Message <routine_name>: Unable to apply port default traffic class COS
mapping to intf <intIfNum>
Explanation Unable to apply default COS map table config to interface
Recommended Action The interface is not suitable for the COS map table setting
Severity Level 6
Error Message <routine_name>: Unable to apply default COS map table config
to intf <intIfNum>
Explanation Unable to apply default COS map table config to interface
Recommended Action The interface is not suitable for the COS map table setting
Severity Level 6
Error Message Unable to apply COS queue defaults on intf <intIfNum>
Explanation Unable to apply COS queue defaults on interface
Recommended Action The interface is not suitable for the COS queue setting
Severity Level 6
Error Message Unable to restore global COS queue defaults on intf <intIfNum>
Explanation Unable to restore global COS queue defaults on interface
Recommended Action The interface is not suitable for the COS queue setting
Severity Level 6
Error Message Unable to set global COS shaping rate <val> on intf <intIfNum>
Explanation Unable to set global COS shaping rate
Recommended Action The interface is not suitable for the COS shaping rate
Severity Level 6
Error Message Unable to obtain COS <cosQueueMgmtTypeStr> drop parms for
intf <intIfNum>, queue <queue>
Explanation Unable to obtain COS drop parms for interface
Recommended Action The interface is not suitable for the COS drop parms