EasyManua.ls Logo

Fujitsu PRIMERGY BX900 - Page 52

Fujitsu PRIMERGY BX900
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Unable to set global COS WRED config for queue <queueId> on
intf <intIfNum>
Explanation Unable to set global COS WRED config
Recommended Action The interface is not suitable for the COS WRED
Severity Level 6
Error Message Unable to get COS WRED config from intf <intIfNum>
Explanation Unable to get COS WRED config
Recommended Action The interface is not suitable for the COS WRED
Severity Level 6
Error Message COS mapping: Unable to apply IP Precedence <prec> to traffic
class <class> on intf <intIfNum>
Explanation Unable to apply IP Precedence to traffic class
Recommended Action The IP Precedence is not suitable for the setting
Severity Level 6
Error Message COS mapping: Unable to apply IP DSCP <DSCP> to traffic class
<class> on intf <intIfNum>
Explanation Unable to apply IP DSCP to traffic class
Recommended Action The IP DSCP is not suitable for the traffic class.
Severity Level 6
Error Message COS mapping: Invalid trust mode value (mode) on intf
<intIfNum>
Explanation Invalid trust mode value
Recommended Action The trust mode value is invalid.
Severity Level 6
Error Message COS mapping: Unable to obtain dot1p mapping table for intf
<intIfNum>
Explanation Unable to obtain dot1p mapping table
Recommended Action The dot1p mapping table is invalid.
Severity Level 6
Error Message COS mapping: Unable to apply trust mode <mode> on intf
<intIfNum>
Explanation Unable to apply trust mode
Recommended Action The trust mode is invalid.

Table of Contents

Other manuals for Fujitsu PRIMERGY BX900

Related product manuals