EasyManua.ls Logo

Fujitsu PRIMERGY BX900 - Page 73

Fujitsu PRIMERGY BX900
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message usmDbServicePortIPAddrSet() returned failure
Explanation Service interface IP address set fail.
Recommended Action Fail to assign the IP Address
Severity Level 6
Error Message DbAgentIpIfAddressSet() returned failure
Explanation Network interface IP address set fail.
Recommended Action The assigned IP address is not the MAC address.
Severity Level 6
Error Message Conflict w/offered IP Addr, error=errorMsg
Explanation Network interface IP address set fail (IP Address conflict).
Recommended Action IP address is doublely assigned in the network segement.
Severity Level 6
Error Message msgQueue creation error for service port.
Explanation Message queue for service port create fail.
Recommended Action Network port are failed to create
Severity Level 6
Error Message TAG ID not found in the buffer
Explanation TAG of DHCP packet search fail.
Recommended Action The BOOTP system is abnormal condition.
Severity Level 6
Error Message dhcp_bind(): servPort dhcpstate failed
Explanation Network interface state fail.
Recommended Action The system is unavailable for the DHCP server and the
environment is need to be checked again.
Severity Level 6
Error Message usmDbDhcp_Client_Identifier_Tag():Oversize DHCP packet in
usmDbDhcp_Client_Identifier_Tag
Explanation DHCP client identifier tag insert fail.
Recommended Action Check the DHCP server system available or not

Table of Contents

Other manuals for Fujitsu PRIMERGY BX900

Related product manuals