are available from the Fujitsu support internet pages at:
https://ts.fujitsu.com/support/
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
Note on the boot watchdog
Before updating or recovering the BIOS and iRMC, ensure that the boot
watchdog is disabled, see "Disabling the boot watchdog" on page 100.
After updating or recovering the BIOS and iRMC, enable the boot
watchdog again, see "Disabling the boot watchdog" on page 100.
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
BIOS flash procedure
▶
Perform the BIOS flash procedure as described in the "BIOS Setup Utility"
reference manual of your server.
BIOS recovery procedure
▶
Perform the BIOS recovery procedure as described in the "BIOS Setup
Utility" reference manual of your server
.
Updating the iRMC firmware
▶
Enter the ServerView iRMC web interface.
▶
Select the Tools menu.
▶
Select Update to open the Update page.
▶
Select iRMC Update.
▶
In the iRMC Update group click Select to search the new firmware.
▶
Select the new firmware and click Start Update.
For more information on iRMC settings, see the iRMC user guides.
Basic software procedures
104 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
