EasyManuals Logo

Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Fujitsu PRIMERGY TX1330 M4
565 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
4.4 Getting access to the component
4.4.1 Safety notes
CAUTION
Only for non-hot plug components:
Before removing or attaching covers, turn off the server
, all
peripheral devices, and any other connected devices.
Because there is a risk of electric shock or damage, please
disconnect all power cords from the outlet.
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
For more information, see "Important information" on page 31
.
Only valid for the floorstand model: Do not lift the server by the
front cover in order not to damage the locking clips.
4.4.2 Rack model
4.4.2.1
Extending the server out of the rack
CAUTION
Use the anti-tilt plate to prevent the rack from tipping when
installing the rack. Pulling the server out of the rack without having
installed the anti-tilt plate may cause the rack to tip over.
Be careful not to pinch fingers or clothes when sliding out the
server or pushing it back. Failure to do so may cause injury.
For more information, see "Important information" on page 31
.
Remove all remaining external cables from the I/O panel and expansion
cards.
If you are not using a cable management arm (CMA kit), ensure that the rear
cables are long enough not to be strained or damaged when extending the
server out of the rack.
Basic hardware procedures
50 Upgrade and Maintenance Manual TX1330 M4

Table of Contents

Other manuals for Fujitsu PRIMERGY TX1330 M4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1330 M4 and is the answer not in the manual?

Fujitsu PRIMERGY TX1330 M4 Specifications

General IconGeneral
Chassis typeTower
Product colorBlack
HDD size2.5 \
RAID supportYes
HDD interfaceSerial ATA III, Serial Attached SCSI (SAS)
Optical drive typeDVD±RW
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Number of HDDs supported8
Bus typeDMI3
Tjunction100 °C
Scalability1S
Processor cache12 MB
Processor cores6
Processor modelE-2136
System bus rate8 GT/s
Processor socketLGA 1151 (Socket H4)
Processor threads12
Processor codenameCoffee Lake
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor boost frequency4.5 GHz
Processor operating modes64-bit
Embedded options availableNo
PCI Express configurations1x16, 2x8, 1x8+2x4
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)80 W
Number of processors installed1
Maximum number of PCI Express lanes16
Memory types supported by processorDDR4-SDRAM
Memory channels supported by processorDual
Memory clock speeds supported by processor2666 MHz
Memory bandwidth supported by processor (max)41.6 GB/s
Maximum internal memory supported by processor128 GB
Compatible operating systemsMicrosoft Hyper-V Server 2012 R2 Microsoft Hyper-V Server 2016 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2016 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation
Memory slots4
Internal memory16 GB
Maximum internal memory64 GB
LAN controllerIntel i210
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity2
Power supply450 W
Power supply input frequency50 - 60 Hz
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCB, RoHS, WEEE, GS, CE, CSA us, ULc/us, FCC Class A, VCCI:V3 Class A + JIS 61000-3-2, GOST-R, KC, CCC, C-Tick, BSMI
PCI Express slots version3.0
On-board graphics card modelNot available
Processor ARK ID134857
Intel Secure Key Technology version1.00
Weight and Dimensions IconWeight and Dimensions
Depth560 mm
Width177 mm
Height455 mm

Related product manuals