Fujitsu PRIMERGY TX1330 M4

Concluding steps
▶
If applicable, install the expansion cards, see "Installing an expansion card"
on page 299
.
▶
If applicable, install the SAS expander board, see "Installing the SAS
expander board" on page 268.
▶
Install the system fan module, see "Installing the system fan module" on
page 85.
▶
"Reassembling" on page 66.
▶
"Connecting the power cord" on page 79.
▶
"Switching on the server" on page 81.
▶
"Resuming BitLocker functionality" on page 121.
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
14.5 iRMC microSD card
14.5.1 Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the “ServerV
iew embedded Lifecycle
Management (eLCM)” user guide.
14.5.2 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
System board and components
TX1330 M4 Upgrade and Maintenance Manual 427