10.2 Basic information
10.2.1 Slots and features
nal connectors
LAN 1
Management
LAN / USB 2.0
LAN 2 /
USB 3.1 Gen 2
VGA
Shared LAN 1 /
USB 2.0
Serial
Micro
SD
Frontpanel
OOB
USB 2
PWR1
Front USB
USB 1
ROC
FAN4
P30
PC98
PWR MAIN
iRMC
S5
Intel
i210
Indicate
SATA
0-3
DIMM1B
DIMM2B
DIMM1A
DIMM2A
DIMM1A
DIMM1B
DIMM2B
DIMM2A
Figure 211: Memory slots overview
The system board is equipped with four memory slots.
The system has to be equipped with at least one memory module.
10.2.2 General memory population rules
–
Populate memory slot 1 / channel A (DIMM 1A) first.
–
Within all channels memory slot 1 must be populated prior to slot 2.
–
For maximum performance, populate both channels with the same amount
of memory (symmetric dual channel configuration).
–
If memory modules with different capacities are used:
–
Install modules with higher capacities first.
– Within a channel, install modules in descending order of capacity.
Main memory
332 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
