Fujitsu PRIMERGY TX1330 M4

iRMC-related status signals
ID indicator Global error
indicator
Description
flashing blue off A remote connection has been
established. Local VGA output has been
disabled during the remote session.
flashing blue flashing orange An emergency flash of the iRMC firmware
is in progress.
For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY TX1330 M4
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
–
iRMC S5 Firmware 1.2 or later
–
supported OOB RAID system
17.2.2.3 Indicator on the ODD
ODDs may have an indicator or not.
Figure 334: Indicator on the ODD (example)
1 Activity indicator
Appendix A
TX1330 M4 Upgrade and Maintenance Manual 503