EasyManua.ls Logo

Fujitsu PRIMERGY TX1330 M4

Fujitsu PRIMERGY TX1330 M4
565 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12.7.2 Removing the ultraslim ODD
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
Preliminary steps
"Removing backup and optical disk media" on page 102
.
"Shutting down the server" on page 47.
"Disconnecting the power cord" on page 48.
"Getting access to the component" on page 50.
The front cover only needs to be removed in order to remove
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install an
ultraslim ODD, skip this step.
Removing the 3.5-inch HDD extension box
Remove the 3.5-inch HDD extension box, see "Removing the 4x 3.5-inch
HDD extension box" on page
260
Accessible drives
390 Upgrade and Maintenance Manual TX1330 M4

Table of Contents

Other manuals for Fujitsu PRIMERGY TX1330 M4

Related product manuals