▶
"Connecting the power cord" on page 79.
▶
"Switching on the server" on page
81.
▶
"Resuming BitLocker functionality" on page 121.
▶
"Performing a fan test" on page 130.
6.4 Redundant power supply
6.4.1 Installing a hot-plug PSU
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: Tool-less
Preliminary steps
No steps needed.
Removing the dummy cover
Figure 66: Removing the dummy cover
▶
Press in on both release latches (1) and remove the dummy cover (2).
Power supply unit (PSU)
TX1330 M4 Upgrade and Maintenance Manual 145
To Next Page
Loading...
