Fujitsu PRIMERGY TX1330 M4

▶
Install the new Dual microSD 64GB Enterprise, see "Installing the Dual
microSD 64GB Enterprise" on page 441
.
Concluding steps
▶
Install the system fan module, see "Installing the system fan module" on
page 85.
▶
"Reassembling" on page 66.
▶
"Connecting the power cord" on page 79.
▶
"Switching on the server" on page 81.
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see "Software
configuration" on page
442.
14.7.5
Replacing the microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: A pair of side-cutting pliers
Preliminary steps
▶
"Locating the defective server" on page
45
.
▶
"Shutting down the server" on page 47.
▶
"Disconnecting the power cord" on page 48.
▶
"Getting access to the component" on page 50.
▶
Remove the system fan module, see "Removing the system fan module" on
page 82.
System board and components
TX1330 M4 Upgrade and Maintenance Manual 447