15 Converting a floorstand model to
a rack model
Field Replaceable Unit
(FRU)
Hardware: 20 minutes
Tools:
– Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
Preliminary steps
▶
"Shutting down the server" on page 47
.
▶
"Disconnecting the power cord" on page 48.
▶
Remove all external cables.
▶
"Getting access to the component" on page 50.
▶
"Removing the anti-tilt bracket" on page 98.
TX1330 M4 Upgrade and Maintenance Manual 459
To Next Page
Loading...
