Fujitsu PRIMERGY TX1330 M4

Concluding steps
▶
If applicable, convert your standard power supply to a redundant power
supply, see "Converting a standard power supply to a redundant power
supply" on page
164.
▶
Install all removed HDD/SSD modules, see "Installing 2.5-inch HDD/SSD
modules" on page 214.
For detailed information on HDD mounting order, see "2.5-inch HDD/
SSD configurations" on page 209.
▶
"Reassembling" on page 66.
▶
"Connecting the power cord" on page
79.
▶
"Switching on the server" on page 81.
▶
Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page 126. Select the
corresponding system name.
▶
"Resuming BitLocker functionality" on page 121.
7.6 HDD extension box
7.6.1 Installing the 8x 2.5-inch HDD/SSD extension box
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Software: 10 minutes
Tools:
Slotted screw driver (for bending in or out accessible drive
mounting brackets)
Preliminary steps
▶
"Suspending BitLocker functionality" on page 99.
▶
"Shutting down the server" on page
47.
▶
"Disconnecting the power cord" on page 48.
Hard disk drive (HDD) / solid state disk (SSD)
TX1330 M4 Upgrade and Maintenance Manual 241