Power-on indicator (5)
Status Description
off The server is switched off.
green on – The server has been switched on but Power Cycle
Delay settings delay it from turning on for a
specified time.
–
The server is switched on and operating normally
.
flashing green slowly The BMC firmware is starting up after the server has
been connected to the mains.
AC connected indicator (6)
Status Description
green on – The server is switched off and connected to the
mains (standby mode).
– The server has been switched on but Power Cycle
Delay settings delay it from turning on for a
specified time.
After connecting the server to the mains, it
will take about 60 seconds until the server
will enter standby mode and can be switched
on.
off – The server is switched off and not connected to the
mains.
–
The server is switched on and operating normally
.
Appendix A
502 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
