Using the ServerView Installation Manager
▶
Boot the system from the ServerView Suite DVD. The ServerV
iew
Installation Manager is being started.
▶
Select your preferred user interface language.
▶
Under Status backup media select No status backup and click Continue.
▶
Select Maintenance.
▶
Select Server Configuration Manager.
▶
Check the box for rack model and save the setting by clicking Save.
Using the ServerView Maintenance Tools
On Windows-based servers with ServerView agents installed, proceed as
follows:
▶
Click Start, point to All Programs, and then point to Fujitsu - ServerView
Suite - Agents - Maintenance Tools.
▶
In the Maintenance Tools menu pane, click the Chassis Model
Configuration tab.
▶
Under Convert to click the Rack Model button.
▶
Click Exit to close the Maintenance Tools menu pane.
For more information on installing ServerView agents, see the
"ServerView Operations Manager - Installation ServerV
iew Agents for
Windows" user guide.
Basic software procedures
132 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
