▶
Remove all HDD modules from the HDD extension box, see "Removing 3.5-
inch HDD modules" on page 188
.
▶
"Getting access to the component" on page 50.
Removing the 4x 3.5-inch HDD extension box
▶
Remove all cables from the 4x 3.5-inch HDD extension box backplane.
▶
If applicable, remove all cables from the slimline ODD.
▶
Open the accessible drive locking bar, see "Opening the accessible drive
locking bar" on page 89.
Figure 157: Removing the HDD extension box
Hard disk drive (HDD) / solid state disk (SSD)
TX1330 M4 Upgrade and Maintenance Manual 261
To Next Page
Loading...
