CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
▶
"Suspending BitLocker functionality" on page 99
.
▶
"Shutting down the server" on page 47.
▶
"Disconnecting the power cord" on page 48.
▶
"Getting access to the component" on page 50.
▶
Remove the system fan module, see "Removing the system fan module" on
page 82.
Selecting the memory slot
▶
Choose the memory slot according to the configuration rules, see "Basic
information" on page 332.
Installing a memory module
Figure 212: Opening the securing clips
▶
Press the securing clips on both sides of the memory slot concerned
outward.
▶
If applicable, remove the dummy module.
Main memory
334 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
