Concluding steps
▶
"Reassembling" on page 66
.
▶
Mount the support bracket and rack mounting rails in the rack, see the
"Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
For Japan:
The document is available online at http://manuals.ts.fujitsu.com
(http://www.fujitsu.com/jp/products/computing/servers/primergy/
manual/). The printed poster is contained in the rack mounting kit.
▶
Connect all external cables.
▶
"Connecting the power cord" on page
79.
▶
"Switching on the server" on page
81.
▶
Update the chassis information of your server on the Chassis ID EPROM
integrated into the front panel board. For further information on how to
obtain and use the ChassisId_Prom Tool, see "Using the Chassis ID Prom
Tool" on page 126.
▶
Change the chassis model setting to "rack server", see "Specifying the
chassis model" on page 131.
Converting a floorstand model to a rack model
TX1330 M4 Upgrade and Maintenance Manual 473
To Next Page
Loading...
