GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 8 Replacement Procedures 8-31
8-5-5 BEP 2.X HDD Replacement (2348186-31) (cont’d)
6.) The BEP 2.x HDD should come with the mounting hardware attached. If the replacement HDD does
not come with a mounting plate, transfer the mounting plate to the ne HDD.
7.) Check the jumper on the back of the new HDD to ensure it is the same as the old one (Figure 8-25).
8.) Slide the new HDD assembly on to the mounting tabs on the bottom of the MOD/CD-RW tray
(Figure 8-31).
Figure 8-29 HDD Assembly with Tray
Figure 8-30 HDD EIDE Jumper
To Next Page
Loading...
Need help?
General
