○○○○○○○○○○○○○○○○○○○○○○
2•38 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
2•38 Reference Guide
The Main Menu options
SAMPLE TRANSLATOR (F1)
This gains access to the Sample Translator, ex-
plained separately in detail from page 2.40 on-
wards.
ALGORITHM (F2)
This option allows you to choose the Algorithms.
Pressing F2 activates a dialog box showing the
current Algorithm.
Rotate the Dial to select a different Algorithm and
confirm with ENTER or cancel the operation with
ESCAPE.
Algorithms available: Single, Dual 1, Dual 2, Dual
3, Dual 4.
LAYER UT. (F4)
The Layer Utility option allows you to create a
new Layer for the current Sound in edit, to im-
port a Layer from another Sound, or delete a
Layer.
Pressing F4 activates a dialog box where you
can select the option required with the Up/Down
cursor buttons.
Create: adds a second or third layer to the cur-
rent sound in edit.
Import: opens a second level dialog window
where you can select the source and destination
layer.
Delete: cancels the currently selected Layer.
This option limits itself to cancelling one or two
layers. It is not possible to cancel all layers - at
least one must be present.
Program the options as required and confirm with
ENTER or cancel the operation with ESCAPE.
LAYER RNG. (F5)
This option allows you to assign a Key range and
a Dynamic range for the current layer.
Pressing F5 activates a dialog box where you
can select the option required with the Up/Down
cursor buttons.
Key Range: assigns the lowest and highest key-
board limits for the current Layer.
Dynamic Range: assigns the lowest and high-
est key velocity limits for the current Layer.
Program the options as required and confirm with
ENTER. Press ESCAPE to cancel the opera-
tion.
The Main Menu options
SAMPLE TRANSLATOR (F1)
This gains access to the Sample Translator, ex-
plained separately in detail from page 2.40 on-
wards.
ALGORITHM (F2)
This option allows you to choose the Algorithms.
Pressing F2 activates a dialog box showing the
current Algorithm.
Rotate the Dial to select a different Algorithm and
confirm with ENTER or cancel the operation with
ESCAPE.
Algorithms available: Single, Dual 1, Dual 2, Dual
3, Dual 4.
LAYER UT. (F4)
The Layer Utility option allows you to create a
new Layer for the current Sound in edit, to im-
port a Layer from another Sound, or delete a
Layer.
Pressing F4 activates a dialog box where you
can select the option required with the Up/Down
cursor buttons.
Create: adds a second or third layer to the cur-
rent sound in edit.
Import: opens a second level dialog window
where you can select the source and destination
layer.
Delete: cancels the currently selected Layer.
This option limits itself to cancelling one or two
layers. It is not possible to cancel all layers - at
least one must be present.
Program the options as required and confirm with
ENTER or cancel the operation with ESCAPE.
LAYER RNG. (F5)
This option allows you to assign a Key range and
a Dynamic range for the current layer.
Pressing F5 activates a dialog box where you
can select the option required with the Up/Down
cursor buttons.
Key Range: assigns the lowest and highest key-
board limits for the current Layer.
Dynamic Range: assigns the lowest and high-
est key velocity limits for the current Layer.
Program the options as required and confirm with
ENTER. Press ESCAPE to cancel the opera-
tion.
○○○○○○○○○○○○○○○○○○○○○○
Edit Style 5•23
○○○○○○○○○○○○○○○○○○○○○○
Edit Style 5•23
EVENTS TABLE AND RELATVE PARAMETERS
STATUS VALUE 1 VALUE 2 VALUE 3 GATE
Note Note name Key On Velocity Key Off Velocity Note Length
expressed as the
Sequencer resolution
(q=192) [0 … 63323]
Program Program change Bank Select MSB Bank Select MSB
Change message. The PC message. To select message. Not
contained in the tracks the SKSE banks, necessary to select
and shown in the use numbers 1 … 16 the SKSE sounds
Microscope has [1 … 128] [1 … 128]
priority over the PC
recorded in the
Performance. [1 … 128]
Control Type of Control Control Change
Change Change (or MIDI Value
controller).
Example: CC00 =
BankSelect MSB,
CC32 = BankSelect
LSB, CC01 =
Modulation, CC07 =
Volume
[1 … 128]
Pitch Value of LSB (Least Value of MSB
Bend Significant Byte). (Most Significant
[0= Off, 1…127 = On] Byte). Effectifve
value of bending.
[0…63 = down
64 = neutral
65…127 = up]
Mono Channel
Touch Aftertouch intensity
[0 … 127]
Poly Note to which Note Aftertouch
Touch Aftertouch is applied. intensity.
[C–1 … G9] [0 … 127]
EVENTS TABLE AND RELATVE PARAMETERS
STATUS VALUE 1 VALUE 2 VALUE 3 GATE
Note Note name Key On Velocity Key Off Velocity Note Length
expressed as the
Sequencer resolution
(q=192) [0 … 63323]
Program Program change Bank Select MSB Bank Select MSB
Change message. The PC message. To select message. Not
contained in the tracks the SKSE banks, necessary to select
and shown in the use numbers 1 … 16 the SKSE sounds
Microscope has [1 … 128] [1 … 128]
priority over the PC
recorded in the
Performance. [1 … 128]
Control Type of Control Control Change
Change Change (or MIDI Value
controller).
Example: CC00 =
BankSelect MSB,
CC32 = BankSelect
LSB, CC01 =
Modulation, CC07 =
Volume
[1 … 128]
Pitch Value of LSB (Least Value of MSB
Bend Significant Byte). (Most Significant
[0= Off, 1…127 = On] Byte). Effectifve
value of bending.
[0…63 = down
64 = neutral
65…127 = up]
Mono Channel
Touch Aftertouch intensity
[0 … 127]
Poly Note to which Note Aftertouch
Touch Aftertouch is applied. intensity.
[C–1 … G9] [0 … 127]
To Next Page
Loading...
