GEM SK760 - Page 109

○○○○○○○○○○○○○○○○○○○○○○
5•22 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
5•22 Reference Guide
INS: (X) (F3)
Inserts the event specified in the “INS. TYPE”
function at the current cursor position. To posi-
tion the inserted event precisely, modify its locator
(the parameters to the left of the «Status» col-
umn).
The events are inserted with the following de-
fault parameter values:
Status 1V 2V 3V Gate
Note: C4 64 64 128
P. Ch 1 1 1
Contr. 1 0 ----
P.Bend 0 64 ----
M.Tch 0 ----
P.Tch C4 0 ----
After inserting the desired event, modify its pa-
rameters accordingly.
INS TYPE... (F4)
Opens a dialog window where you can select the
type of event to insert manually with the «Ins:
(x)» function.
Select the type of event and press ENTER.
DELETE (F6)
Deletes the selected event.
CATCH LOCATOR (F7)
Selects the event currently playing, or the event
immediately after the current riff position.
GO TO LOC... (F8)
Takes the cursor directly to the first event in the
specified measure. The number can be entered
using the DIAL.
Specify the locator and press ENTER to confirm.
resolution
Event List
event type
(Status)
Value 3
Value 2
Value 1
Gate
track in edit
measure
beat
INS: (X) (F3)
Inserts the event specified in the “INS. TYPE”
function at the current cursor position. To posi-
tion the inserted event precisely, modify its locator
(the parameters to the left of the «Status» col-
umn).
The events are inserted with the following de-
fault parameter values:
Status 1V 2V 3V Gate
Note: C4 64 64 128
P. Ch111
Contr. 1 0 ----
P.Bend 0 64 ----
M.Tch 0 ----
P.Tch C4 0 ----
After inserting the desired event, modify its pa-
rameters accordingly.
INS TYPE... (F4)
Opens a dialog window where you can select the
type of event to insert manually with the «Ins:
(x)» function.
Select the type of event and press ENTER.
DELETE (F6)
Deletes the selected event.
CATCH LOCATOR (F7)
Selects the event currently playing, or the event
immediately after the current riff position.
GO TO LOC... (F8)
Takes the cursor directly to the first event in the
specified measure. The number can be entered
using the DIAL.
Specify the locator and press ENTER to confirm.
resolution
Event List
event type
(Status)
Value 3
Value 2
Value 1
Gate
track in edit
measure
beat
○○○○○○○○○○○○○○○○○○○○○○
Edit Sound 2•39
○○○○○○○○○○○○○○○○○○○○○○
Edit Sound 2•39
EXIT (F6)
Press this soft button to escape permanently from
the Edit Sound environment without saving even-
tual modifications.
See “Escape from Edit Sound” on page 2.14 of
this chapter.
SAVE (F8)
Press this soft button to save your programmed
sound to the SK760/880SE Sound Library and
escape from Edit Sound permanently.
Refer to the section entitled “Storing Sounds”
which follows on the next page (2.40).
On page 2. 42, you will find some useful sugges-
tions and tips to obtain the best results from
Sound Editing tasks.
EXIT (F6)
Press this soft button to escape permanently from
the Edit Sound environment without saving even-
tual modifications.
See “Escape from Edit Sound” on page 2.14 of
this chapter.
SAVE (F8)
Press this soft button to save your programmed
sound to the SK760/880SE Sound Library and
escape from Edit Sound permanently.
Refer to the section entitled “Storing Sounds”
which follows on the next page (2.40).
On page 2. 42, you will find some useful sugges-
tions and tips to obtain the best results from
Sound Editing tasks.